Christmas Tree Stand Base, Wood and Metal, Heavy Duty up to 9 ft

  

The double six-point star sits at the base of the tree, highlighting the beautiful greenery of a natural Christmas tree. The gold lacquered metal surface of the holding cup is in style with the shiny holiday decor, while the silky shine spruce wood gives the base a natural character. You can fill the holding cup with water to keep your tree from drying. Cup has three strong screws for holding the tree in the upright position all Christmas long.

The stand has Felt pads on the bottom of the wood base to protect your floor surface from scratching. The recommended height of the tree is up to 260 cm (8 ft 6 in) and with a trunk diameter of up to 8.0 cm (3 5/32). Designed and handcrafted by Dragonfly Creations. Steel protected by acrylic lacquer.

ØxH: 47,3x15,2 cm (18 5/8" x 5 63/64") Cup max Ø: 8,9/8,2 cm (3 1/2" / 3 15/64") Item no. WxDxH: 51x46x21 cm (20 5/64" x 18 7/64" x 8 17/64). Weight: 3,93 kg (8.6 lb)(net weight), 5,5 kg (12.13 lb) (with box and packaging material). Put the end part of the tree trunk in the holding cup down to the bottom spike.

Adjust the vertical angle of the tree using the thumbscrews. After the tree is in place, you can fill the holding cup with a small amount of water to keep the tree fresh for a longer time. Important: The waterline must be below the thumbscrews. Do not exceed the recommended height of the tree. T o keep up the appearance of the Christmas stand, please follow these few simple instructions.

To prevent scratches, regularly wipe the dust from metal and wood parts using a soft and lightly dampened cloth. Do not use solvents or cleaning agents for cleaning wood or metal surfaces. Wood surfaces are finished with oil and a mix of natural waxes and are not resistant to solvents or long-standing water. After removing a tree from the stand, clean the bolts of wood resin. Felt pads on the bottom are provided to protect your floor from scratches.